FIber Cement Board Both Non Asbestos and Silica.

   

                                                       Green Sheet on Process Making

                                                                Green sheet on Staker

                                                       FCB  after  destaking

                                                           FCB on BendingTest

                                                                Warehouse of FCB

Fiber Cement Board in Good Quality.

Many manufacturing of FCB just running to making the Fiber Cement Board Products as following , duplicated  or following to the person which have been experienced to the previous manufacture or factory so both the processed  and formulation as same as base on the previous factory.
Could  you known the results ? If making the Fiber Cement Board within the difference model or specification of machine?
Most of Fiber Cement Maker just knowing to operating the machine especially to main machine of green sheet both hatschek or flow on machine.

Three Things Are Important as Basis Foundamental
1. Mechanical - Machine.
    Specification of machine was very important as basis to making the good and high quality of
    Products i.e in Hatschek Machine
    - How big the vat machine and the diameter of round sieve.
    - The structures , orientation screw and how many blade in the Vat
    - Flow pipe process as outlet and Inlet from Premixer / Level box / stuff box to the Vat .
    - Brest Roll , vaccum and cleaning process.
     Etc
2. Operational.
       Needed the Person which very experiances and as guidance to find the good and the right
       machine as Requirment basic base on the productivity and good results also the capacity of
       machine.
      - Right place in the total flow process of production and  also both mass and water balance.
      - Right in reading the equipment specification base on the equipment capacity.
      - Right to make the lay out related to the machine and processing.
       Etc.
        All about will be supported and important think to make easier operational of FCB.
3. Raw material and additives
    Choising and composition of material will be important to impact the quality of products.
    How to prepare the material before used to the process and also the additives too.